Prior to purchase - Verify Your Thermocouple!

The Yoder Smokers Zero Downtime Kit is an essential companion for YS640 and YS480 owners who take their grilling seriously. We understand that even the most reliable grills can encounter hiccups, so with the Zero Downtime Kit, you're armed with the parts you need tackle any unexpected situation. Say goodbye to downtime and hello to uninterrupted grilling. Keep those flames rolling!

The ATBBQ Zero Downtime Kit is also a great way to purchase many of the internal parts needed to complete a refurbishment/refresh on older grills as well.

Parts Included:

• One Short "Type J" Thermocouple for YS1500s
• One Ceramic Igniter
• One Ball Bearing Inner/Outer Fan Kit: This is an upgrade for grills manufactured prior to August of 2023
• One Fuse Holder
• Three Spare Fuses
• One Power Cord
• One Tube of High Heat Silicone Sealant
• One Replacement WiFi/Bluetooth Antenna
• One Spare Food Probe

Verification

There are two probe types used in S-Series pellet grills, the type of probe must be verified as they are not interchangeable. To verify the type of probe that your pellet grill was built with, please follow these steps on your pellet grill:

1. Press the menu button at the main screen.
2. Rotate the selector knob clockwise, highlight "About" and
   press the knob. Then rotate knob clockwise again until
   you see probe under "About".
3. Note the type of probe your grill is using: it will either list "PT1000" or "Type J"

Further Verification

If you are unsure what probe type to use on your pellet grill, please follow the simple walk-through instructions in the video below, or call us at 316.440.3950 to speak with a Customer Service Sales Associate.

Note: This kit is designed for grills that were manufactured after 1/27/2015 and before 6/2022 and use the ACS WiFi enabled control system. To verify that this is the correct kit, you should see a short thermocouple on the back side wall of your smoker. If your grill has the ACS control system, but was manufactured after 06/2022, you will need to purchase the Zero Downtime Kit: For YS480/YS640/YS1500 Grills With ACS Controller (With WiFi) and Short PT-1000 Thermocouple